ZestSC1 1000-1 480Mbits/s burst, 38MBytes/s sustained performance. 1 million gate Xilinx Spartan 3 FPGA, Cypress FX2 USB 2.0, 1MB SRAM. Compact form factor 74mm x 122mm. Easy integration for OEM applications.		ZestSC1 1000-8 8MB SRAM, 1 million gate Xilinx Spartan 3 FPGA, Cypress FX2 USB 2.0. Streaming, Register and Signaling interface between the FPGA & FX2. 480Mbits/s burst, 38MBytes/s sustained performance. Compact form factor 74mm x 122mm
ZestSC2 2000 32MB SDRAM and Flash memory. 2 million gate Xilinx Spartan 3 FPGA, Cypress FX2 USB 2.0. 480Mbits/s burst, 38MBytes/s sustained performance. Massive 200 I/O user IO pins. 150mm x 122mm compact module		ZestSC2 4000 Same performance as the ZestSC2 2000 but fitted with a high density 4 million gate Xilinx Spartan 3 FPGA (-5 speed grade). 64MB SDRAM, 8MB SRAM and Flash memory. Cypress FX2 USB 2.0. Streaming, Register and Signaling interface between the FPGA and FX2. Massive 200 I/O user IOpins. 150mm x 122mm compact module

Our product and service solutions cover a comprehensive mix of FPGA, DSP and microprocessor solutions (including Xilinx MicroBlaze, Virtex II Pro, Virtex 4 and Virtex 5 device families), the Cypress EZ-USB FX2 USB microcontroller, embedded software and custom design including PCB layout and VHDL/ Verilog coding.

FPGA USB Hardware Modules

Orange Tree's FPGA USB hardware modules are ideally suited to interconnect between a host and a real-time embedded system. The ZestSC1 and ZestSC2 boards feature high density Xilinx Spartan-3 FPGAs and the Cypress EZ-USB FX2 USB microcontroller.

The ZestSC1 and ZestSC2 boards are used across a variety of applications including semiconductor prototyping and demonstration, industrial control systems, high volume data acquisition (DAQ) and Intellectual Property development

• High performance with best-in-class sustained data rates of 40MB/s
• Easy to use out of the box solutions
• Comprehensive software support
• On-board SDRAM and optional SRAM
• Lots of I/O for maximum versatility
• Configuration of FPGA over USB (and from on-board Flash for ZestSC2)
• Rapidly process data on the fly
• Interface to external equipment to control and/or acquire data from it
• Interface to a host computer for storing and visualising the data and for controlling the application

Created by design engineers for design engineers the ZestSC1 and ZestSC2 work out of the box. The boards let the designer focus on the application, not struggling with bringing up the hardware. Each board is supplied with comprehensive software to enable communications with the host operating system and also example IP cores for the FPGA interfaces to on-board chips.

More information on the ZestSC1 and product datasheet

More information on the ZestSC2 and product datasheet

Contact an Orange Tree representative